Check the DB-37 female Failsafe connector for jumper connections between Pin 2 (failsafe) and Pin 12 or 19 (Both Ground). Also make sure the DB-37 connector is fully seated into the GPIO connector.
All my front LED's are green but why do I get a red EXC DRV & PA fault LED when I un-mute my STX? Print
Created by: Rick Voepel
Modified on: Tue, 8 Oct, 2019 at 10:32 AM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.