RF FAQ
Check the DB-37 female Failsafe connector for jumper connections between Pin 2 (failsafe) and Pin 12 or 19 (Both Ground). Also make sure the DB-37 connector...
Tue, 8 Oct, 2019 at 10:32 AM
Attach for reference you will find the block schematic made regarding the Transmitter ON command and the 120 Hz require from the Power Supply Board 1-2 to e...
Thu, 4 May, 2023 at 11:03 AM
Yes. The PA modules and the IPA modules are interchangeable on the FM 10S / FMi 703 and FM 20S / FMi 1405 series transmitters
Tue, 8 Oct, 2019 at 10:34 AM
Yes, all RF transmitter installations should include lightning protection. Please view our attached white paper, Protecting Solid State Transmitters Agains...
Wed, 16 Oct, 2019 at 5:41 AM
No. Please refer to the "FM 10S / FMi 703 FM+HD Transmitter Manual" for power connections. You can also reference the original customer orde...
Thu, 31 Oct, 2019 at 2:20 PM
Yes. Category 6, (ANSI/TIA/EIA-568-B.2-1) is a cable standard for Gigabit Ethernet and other network protocols that is backward compatible with the Category...
Tue, 8 Oct, 2019 at 10:39 AM
Problem You are unable to connect to the Web UI of your ETG model transmitter, OR The IP address of your ETG model transmitter appears as 0.0.0.0 on the f...
Thu, 2 Mar, 2023 at 9:03 AM
See attached document of common FAQs about the Importer IDi 20/40/50 version 4.x.x. or 5.x.x STS-05-0002 HD Radio Importer FAQ
Tue, 7 Jan, 2020 at 4:39 PM
If you want to check and measure that the Power Supply Board is able to provided the full B+ voltage output perform the following; 1) Remove the RF PA M...
Tue, 16 May, 2023 at 8:22 AM
Complete question: I have a Red PS LED indicator illuminated on the front panel of the Main PA, how can I determine which STX GEN II transmitter B+ power su...
Tue, 8 Oct, 2019 at 10:42 AM