This document describes how to adjust MDCL+ Compression levels.

  1. Press the Menu button on front of MDCL+ until you get this screen Settings Screen.  
  2. Press the Item button on the front of the MDCL+  until “Compression Level” is highlighted on the screen.
  3. Once the “Compression Level” is highlighted push either the “Up” or “Dn” button on front of MDCL+ .  This will take you to the Set Comp Level screen. 
  4. Use the UP and DN buttons on the front of the MDCL+ to adjust the Comp Level to your desired level (factory set is -3dB). 
  5. Once you have your entered desired level press “Item” to back out of set comp level screen. Then press the Menu button until you get back to the home screen.  Once at the home screen it will save your setting.  Home screen is below.
  6. If compression is Disabled, then you need to Enable it by using the Item button to get the Settings page below. Highlight “Comp: Enable/Disable”. Once highlighted press up or down to Enable it.
  7. Once you have “Enabled” then hit “ITEM” until you are back to the home screen. Once at the home screen it will save your setting.